| |
Spindle speeds 8000RPM (optional 12000RPM). |
| |
Rigid tapping up to 6000RPM. |
| |
Direct drive spindle motor system provides minimum power loss of transmission and stable running performance. |
| |
3-Axes rapid travers are 48m/min. |
| |
Tool loading capacity 24 tools |
| |
Special single piece of X-axis Cover avoid crashing while at high speed traverse. Durable and no noise. (patent) |
| |
Every machine is precisely measured by laser interferometer system. ball-bar testing equipment, spindle dynamic balance adjustment, spindle speeds instrument, and so on. |
| Specifications: |
| Control Unit |
FANUC series |
| MITSUBISHI-MELDAS series |
| Spindle |
R.P.M. |
80~8000rpm
120~12000rpm (OP.) |
| Spindle taper |
ISO#40 |
| Spindle motor |
7.5kw (10 HP) / 11KW(15HP)(OP.) |
| Table |
LengthxWidth |
900*520mm (35.43"x20.47") |
| Working area-X,Yaxis |
800*530mm (31.50"x20.87") |
| Main Travel |
X Axis travel |
800mm (31.50") |
| Y Axis travel |
530mm(20.87") |
| Z Axis travel |
530mm(20.87") |
| Feed |
Rapid traverse X/Y/Z Axes |
48m/min (1890 IPM) |
| Cutting feed rate |
1~15000mm/min
(0.039~590.6 IPM) |
| Automatic Tool Change |
Tool specification |
BT-40 |
| Tool change time |
(60HZ) |
T.-T.
C.-C.
No.of tools
Max.tool dia. (adjacent) |
1.25sec
2.5sec
24+1
80 mm(3.15") |
| Tool selection method |
Random |
| Floor Space |
LengthxWidthxHeight |
1900x3250x2700mm (74.8"x128"x106.3") |
| Packing size |
LengthxWidthxHeight |
2080x3090x2540mm
(81.9"x121.7"x100") |
| Weight |
Net weight |
5500kgs (12100 lbs) |
| Gross weight |
6000kgs (13200 lbs) |
